home *** CD-ROM | disk | FTP | other *** search
- Path: news2.aimnet.com!usenet
- From: JNavas@NavasGrp.com (John Navas)
- Newsgroups: comp.dcom.modems
- Subject: Re: BAD CRC (who's fault?)
- Date: Mon, 08 Jan 1996 09:01:52 GMT
- Organization: The Navas Group of Dublin, CA, USA
- Message-ID: <4cqmgc$9pq@news2.aimnet.com>
- References: <4cnsqs$k19@cmcl2.NYU.EDU>
- NNTP-Posting-Host: dial-bp1-30.iway.aimnet.com
- X-Newsreader: Forte Free Agent 1.0.82
-
- [Posted to comp.dcom.modems]
- m-sr0069@sparky.cs.nyu.edu (Salem Reyen) wrote:
-
- >I keep receiving the "bad CRC" messages whenever I try to download some files
- >from a Unix workstation (Sun Sparc 20). The modem (Motorola v3400) stops
- >receiving data for 10 sec right after the "bad CRC", and it starts again.
- >I have no idea which component(s) causes this problem but I really hope this is
- >correctable. Here is the configuration of remote/local site...
-
- >Remote: Sun Sparc 20 (using sz command), the modem pools consist either
- > USR Sportstor or MutiTech...
-
- >Local: 486/33 clone with Motorola v3400 modem and a serial card w/o 16650
- > UART chip and Telix 3.22.
-
- >The problem is when I issue ....
-
- >sz * <------ Lots bad CRC/subdatapack too long....
- >sz -w 2048 * <---- fewer bad CRC (the -w is for window size)
-
- >I don't this is the hardware problem but I'm sure....
-
- See my FAQ.
-
- --
- Best regards,
- John mailto:JNavas@NavasGrp.com http://web.aimnet.com/~jnavas/
- 28800 Modem FAQ: http://web.aimnet.com/~jnavas/modem/faq.html
-
-